Power Switches

myStrom WLAN Energy Control Switch

The "myStrom WLAN Energy Control Switch" provides 1 power switch.
Moreover can measure the energy consumption.

Attribute Value
Relays 1 (10A @ 250V AC)

Website


ETH008

The ETH008 provides 8 volt free contact relay outputs with a current rating of up to 16A each, 8 digital I/O and 4 analogue inputs.

The embedded webserver enables configuring password, username, IP for the webinterface. Moreover it enables configuring password and port settings the "webservice" to use the board without the webserver.

Attribute Value
Relays 8 (16A @ 250V AC)

Website Details

ETH00=

ETH484

The ETH484 provides 4 volt free contact relay outputs with a current rating of up to 16A each, 8 digital I/O and 4 analogue inputs.

The embedded webserver enables configuring password, username, IP for the webinterface. Moreover it enables configuring password and port settings the "webservice" to use the board without the webserver.

Attribute Value
Relays 4 (16A @ 250V AC)
Digital I/O 8
Analogue inputs 4

Website Details

ETH484

HL-52S Relay Module

5V HL-52S Relay Module 2 volt free contact relay outputs with a current rating of up to 10A each.
With a jumper you can select how to power the 5V relay. Either by the Arduino/Raspberry or by an external source. Also available with 4, 8 and 16 switches.

Attribute Value
Relays 2 (10A @ 250V AC)

Manual


Energenie EG-PMS2-LAN

The Energenie EG-PMS2-LAN provides 4 CE certificated power siwtches for 230V/10A.

It provides a half-baked web interface.

Attribute Value
Relays 8 (16A @ 250V AC)

Website Details

ETH484